Find us
Shopping cart is empty.
or Register Loged as
  •  
  • LXS-X3 LXS-X3

    The LXS-X3 Spray Gun with 3 Inch Extension:

    The LXS-X3 is installed with a 3 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 pressure tank or PT-64 pressure cup if needed.

    Specs:

    Part Number:      LXS-X3

    Type:                    Extension Spray Gun

    Head Size:           .055 or 1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 30-40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $199.00 Qty
  • HL-3/16-10 HL-3/16-10 10' Braided Air Hose with couplings. Has 1/4 inch NPT couplings on both ends. Braided air hose. Fits Paasche's larger sprayers. 1/4" NPT fitting on both ends.
    $15.25 Qty
  • HA-1/4-10 HA-1/4-10 10' Fluid hose
    $15.25 Qty
  • HL-3/16-20 HL-3/16-20 20' Braided Air Hose with couplings. Has 1/4 inch NPT couplings on both ends. Braided air hose. Fits Paasche's larger sprayers. 1/4" NPT fitting on both ends.
    $23.50 Qty
  • PT-25 PT-25 2.5 Gallon Pressure Tank with regulator.
    $159.00 Qty
  • PT-64 PT-64 64 Ounce Pressure Cup
    $59.00 Qty

STAY CONNECTED: Sign up for your newsletter

About us

Made in USA

Paasche Airbrush Company is proud to machine, assemble and test its airbrushes at its factory located in Chicago, Illinois.  There is a link above on the home page that will take you on a walk though of our company.

Blog

No blog posts found.