Find us
Shopping cart is empty.
or Register Loged as
  •  
  • KRS-X3 KRS-X3

    The KRS-X3 Spray Gun with 3 Inch Extension:

    The KRS-X3 is installed with a 3 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 or PT-64 is needed.

    Specs:

    Part Number:      KRS-X3

    Type:                    Extension Spray Gun

    Head Size:           1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $199.00 Qty
  • KRS-X6 KRS-X6

    The KRS-X6 Spray Gun with 6 Inch Extension:

    The KRS-X6 is installed with a 6 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 or PT-64 is needed.

    Specs:

    Part Number:      KRS-X6

    Type:                    Extension Spray Gun

    Head Size:           1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $215.00 Qty
  • KRS-X12 KRS-X12

    The KRS-X12 Spray Gun with 12 Inch Extension:

    The KRS-X12 is installed with a 12 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 or PT-64 is needed.

    Specs:

    Part Number:      KRS-X12

    Type:                    Extension Spray Gun

    Head Size:           1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $265.00 Qty
  • KRS-X18 KRS-X18

    The KRS-X18 Spray Gun with 18Inch Extension:

    The KRS-X18 is installed with a 18 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 or PT-64 is needed.

    Specs:

    Part Number:      KRS-X18

    Type:                    Extension Spray Gun

    Head Size:           1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $285.00 Qty
  • KRS-X24 KRS-X24

    The KRS-X24 Spray Gun with 24 Inch Extension:

    The KRS-X24 is installed with a 24 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 or PT-64 is needed.

    Specs:

    Part Number:      KRS-X24    

    Type:                    Extension Spray Gun

    Head Size:           1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $299.00 Qty
  • KRS-X36 KRS-X36

    The KRS-X36 Spray Gun with 36 Inch Extension:

    The KRS-X36 is installed with a 36 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 or PT-64 is needed.

    Specs:

    Part Number:      KRS-X36    

    Type:                    Extension Spray Gun

    Head Size:           1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $335.00 Qty
  • KRS-X48 KRS-X48

    The KRS-X48 Spray Gun with 48 Inch Extension:

    The KRS-X48 is installed with a 48 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 or PT-64 is needed.

    Specs:

    Part Number:      KRS-X48    

    Type:                    Extension Spray Gun

    Head Size:           1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $395.00 Qty
  • KRS-E3 KRS-E3 The KRS-E3 comes installed with a 3" spray extension and fan spray aircap.  This extension gun can also be installed with a 45 or 90 degree elbow and has an optional round spray aircap which are shown to the right.  Also keep in mind the paint of fluid must be pressure fed from a pressure pot which is also shown to the right. 
    $208.00 Qty
  • KRS-E6 KRS-E6 The KRS-E6 comes installed with a 6" spray extension and fan spray aircap.  This extension gun can also be installed with a 45 or 90 degree elbow and has an optional round spray aircap which are shown to the right.  Also keep in mind the paint of fluid must be pressure fed from a pressure pot which is also shown to the right. 
    $218.00 Qty
  • KRS-E12 KRS-E12 The KRS-E12 comes installed with a 12" spray extension and fan spray aircap.  This extension gun can also be installed with a 45 or 90 degree elbow and has an optional round spray aircap which are shown to the right.  Also keep in mind the paint of fluid must be pressure fed from a pressure pot which is also shown to the right. 
    $288.00 Qty
  • PT-25 PT-25 2.5 Gallon Pressure Tank with regulator.
    $159.00 Qty

STAY CONNECTED: Sign up for your newsletter

About us

Made in USA

Paasche Airbrush Company is proud to machine, assemble and test its airbrushes at its factory located in Chicago, Illinois.  There is a link above on the home page that will take you on a walk though of our company.

Blog

No blog posts found.