Find us
Shopping cart is empty.
or Register Loged as
You are here: Discount Class : E
  •  
  • DT-500F DT-500F Tanning Kit.  This system includes our 500T HVLP Tanning Spray Gun for fast coverage. The gravity feed helps with thicker solutions and allows you to spray at lower pressures for less overspray. The Tanning Gun gives a 2-6-inch spray pattern which is fully adjustable with the turn of a knob. The DA400R compressor is quiet and has the auto shutoff feature which tuen the compressor off when the gun is not being sprayed. Application time is 5 minutes or less. This kit comes complete with 500T spray gun, 4oz cup, 10-foot hose and DA400R compressor with regulator. You also recieve (3) 16 ounce bottle of our Leisure Tan Solution, one each of 8%, 10% and 12%.
    $235.00 Qty
  • DT-600F DT-600F Tanning Kit.  This system includes our 400T Tanning Spray Gun for quicker coverage. We designed the 400T to be simple to use and easy to maintain. No knobs or button to adjust and hard to clog. The Tanning Gun gives a 4-5-inch spray pattern which can cut your application time to under 5 minutes. The DA400R compressor is quiet and has the auto shutoff feature which tuen the compressor off when the gun is not being sprayed. This kit comes complete with spray gun, 6oz cup, 10-foot hose and DA400R compressor with regulator. You also recieve (3) 16 ounce bottle of our Leisure Tan Solution, one each of 8%, 10% and 12%.
    $265.00 Qty
  • LXS-X6 LXS-X6

    The LXS-X6 Spray Gun with 6 Inch Extension:

    The LXS-X6 is installed with a 6 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 pressure tank or PT-64 pressure cup if needed.

    Specs:

    Part Number:      LXS-X6

    Type:                    Extension Spray Gun

    Head Size:           .055 or 1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 30-40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $215.00 Qty
  • LXS-X12 LXS-X12

    The LXS-X12 Spray Gun with 12 Inch Extension:

    The LXS-X12 is installed with a 12 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 pressure tank or PT-64 pressure cup if needed.

    Specs:

    Part Number:      LXS-X12

    Type:                    Extension Spray Gun

    Head Size:           .055 or 1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 30-40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $265.00 Qty
  • LXS-X18 LXS-X18

    The LXS-X18 Spray Gun with 18 Inch Extension:

    The LXS-X18 is installed with a 18 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 pressure tank or PT-64 pressure cup if needed.

    Specs:

    Part Number:      LXS-X18

    Type:                    Extension Spray Gun

    Head Size:           .055 or 1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 30-40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $285.00 Qty
  • LXS-X24 LXS-X24

    The LXS-X24 Spray Gun with 24 Inch Extension:

    The LXS-X24 is installed with a 24 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 pressure tank or PT-64 pressure cup if needed.

    Specs:

    Part Number:      LXS-X24

    Type:                    Extension Spray Gun

    Head Size:           .055 or 1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 30-40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $299.00 Qty
  • LXS-X36 LXS-X36

    The LXS-X36 Spray Gun with 36 Inch Extension:

    The LXS-X36 is installed with a 36 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 pressure tank or PT-64 pressure cup if needed.

    Specs:

    Part Number:      LXS-X36

    Type:                    Extension Spray Gun

    Head Size:           .055 or 1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 30-40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $335.00 Qty
  • LXS-X48 LXS-X48

    The LXS-X48 Spray Gun with 48 Inch Extension:

    The LXS-X48 is installed with a 48 inch extension and 360 degree aircap.  You will need 1/2 inch clearance to enter the item you are spraying.  The 360 degree aircap will spray the sides as you push in or pull out of the cavity.  For different spray patterns the aircap can be changed to the following:

    AXIB (spherical), AXIF (straight fan), AXIF-45 (45 degree fan), AXIF-90 (90 degree fan), AXR (straight round),

    AXIR-15 (15 degree spray backwards)

    Must be pressure fed from a pressure tank.  See PT-25 pressure tank or PT-64 pressure cup if needed.

    Specs:

    Part Number:      LXS-X48

    Type:                    Extension Spray Gun

    Head Size:           .055 or 1.4mm

    Air Volume:         4-8 CFM

    Air Pressure:       45 PSI or more

    Fluid Pressure:    Up to 30-40 PSI

    Fluid Inlet:            3/8" NPS            

    Air Inlet:               ¼” NPT

    Spray Pattern:    Determined by aircap used

    $395.00 Qty
  • F88P-0 F88P-0 Silvering gun With Handle in center of two spray heads.Can be Pressure fed from tank or Siphon fed from USP-Qt quart Bottles.Wet sections are ST. ST.
    $390.00 Qty
  • BUS2RS-4 BUS2RS-4 silvering gun With 2 heads and round pattern
    $327.00 Qty
  • BUS2RS-0 BUS2RS-0 Silvering gun with 2 heads and round spray pattern
    $312.00 Qty
  • 2R2-3/8M 2R2-3/8M Two egulators With Gauges, line gauge With 12M moisture condenser
    $259.00 Qty
1 2

STAY CONNECTED: Sign up for your newsletter

About us

Made in USA

Paasche Airbrush Company is proud to machine, assemble and test its airbrushes at its factory located in Chicago, Illinois.  There is a link above on the home page that will take you on a walk though of our company.

Blog

No blog posts found.